When you choose to replace your laminate or wall-to-wall carpet with gorgeous hardwood floors, it’s critical to understand how to maintain and clean them. They may not be able to handle all kinds of stains and filth, but a simple pass with a microfiber mop and cleaning solution is essential for their longevity.
It’s interesting to note that the easiest approach to clean wood floors is to stay away from solutions that promise to renew, polish, shine, or rejuvenate the wood. Although these remedies may momentarily improve the floor’s appearance, they are not made to withstand long-term use.
Here are tips to maintain the luster without damaging the finish:
Choosing the Right Cleaning Product
Different finishes require different treatments, so there’s no
one-size-fits-all rule. When in doubt, stick to basics. For a DIY
cleaner, mix four cups of warm water with a few drops of Murphy Oil
Soap. Alternatively, you can use an essential oil-based cleaner for a
touch of aromatherapy.
Avoid Certain Cleaning Products
While old-fashioned solutions are reliable, it’s crucial to avoid
some cleaning products. Steer clear of chlorine bleach, even if diluted,
as it can weaken the wood structure. Harsh chemicals can create hazing,
especially on floors with a polyurethane finish. If hazing occurs, a
clean cloth dipped in warm water is effective in removing the cloudy
film.
Some suggest a homemade solution of water and white vinegar. However,
there’s debate about using acid on floors, as it may potentially dull
the surface over time.
How Often to Deep Clean Hardwood Floors
Keeping hardwood floors in top condition requires regular cleaning.
High-traffic areas should be cleaned with a dust mop or vacuum
frequently, ideally daily. It’s important to address spills and water
puddles promptly to prevent staining and attracting more dirt. With
consistent upkeep, a thorough cleaning using a damp mop is typically
needed every few months.
Essential Tools and Materials
- Dust mop
- Vacuum
- Wet mop with a cleaning pad
- Hardwood floor cleaner
- Microfiber cloths
- Putty knife
- Mineral oil
Steps for Deep Cleaning Hardwood Floors
Dust and Debris Removal
Start by eliminating surface-level dust and debris using a dust mop
with a microfiber cloth or a vacuum, similar to your regular cleaning
routine.
When using a vacuum, adjust the setting to bare floors to avoid scratching or dulling the hardwood over time.
Damp Mop Application
Wet the cleaning pad on the mop with warm water. Ensure the mop is
damp rather than soaking wet, or use a floor spray specifically designed
for hardwood floors with a dry cleaning pad.
A soft cleaning pad traps dirt effectively. Be cautious with liquid
usage; if the floors become damp, go over them with dry cleaning pads.
Addressing Stains and Buildup
While mopping, check for stains or buildup between floorboards. Use a
putty knife to gently scrape away grime and spot clean areas that need
extra attention. Optionally, use an antibacterial wood floor cleaner for
disinfecting.
Removing Stains from Hardwood Floors
- Mineral Oil Application: Apply mineral oil to the stained area.
- Buffing the Stain: Use a dry microfiber cloth to
buff away the stain. Avoid using the oil as a spot cleaner; instead,
distribute it to a larger section around the stain. Let it sit or “cure”
for several hours, then wipe away with a clean, dry microfiber cloth.
Tips to Prolong the Cleanliness of Hardwood Floors
While indoor carpets offer protection to hardwood floors, the
decision to cover them may raise the question: why have hardwood floors
in the first place? To maintain the beauty of your hardwood floors,
consider having guests and family remove their shoes before walking on
them.
This simple practice can significantly reduce the amount of dirt and
debris brought in on shoes, which, if left unchecked, can act like
sandpaper on the finish, potentially causing dullness or scratches to
the wood.